SLD-TSP（HD）

features and uses

SLD-TSP (HD) catalyst is the upgraded product of SLC-SP2 (HD), which is a Ziegler-Natta polyethylene catalyst with a special SiO2 carrier, 4000~8000 KgPE/Kgcat, suitable for Univation, Innovene, GPE, Spherilene C, Spherilene G processes in condensed and supercondensed state. The Ziegler-Natta polyethylene catalyst is particularly suitable for the production of medium and low density polyethylene speciality products with a narrow molecular weight distribution melt index in the range of 0.5 to 50 g/10min. It can be used for the production of cable sheathing pipe bases, cast film, bottle caps, household utensils, containers, outdoor amusement rides, playboats, road guardrails, crash cushions, toys, irregular containers, heat preservation boxes, Turnover box, fishing nets and other linear polyethylene products.

Get full product information

Product Introduction

Product quality indicators：

Item	Quality Indicators
Appearance	yellow powder
Magnesium content (calculated as Mg) (mass fraction)/%	1.5～3.0
Titanium content (calculated as Ti) (mass fraction)/%	0.8～1.5
Bulk density/(kg/m³)	370～430
Productivity/（KgPE/Kgcat）	4000-8000

Product grades:

Typical product grades include：DMDA-8910、DMDB-8916、DMDB-8920、DGDA-6094、DMDA-8007、DMDB-8008、HD-62N07、HD-52B18 etc.

PE product parameters：

Catalyst grade	Product grade	Product density（g/cm³）	Product MI（g/10min）	Product application
SLD-TSP（HD）	DMDB-8910	0.954±0.002	10±2	Good hardness and alertness, high softening point and usage temperature, good chemical resistance, suitable for production of daily plastic parts such as circulation cases and buckets
	DMDB-8916	0.951±0.002	16±3	Suitable for producing daily plastic parts such as circulation cases and buckets. Mixed with high-pressure polyethylene, can be used for weaving coating with low shrinkage, etc
	DMDB-8920	0.954±0.002	20±4	Suitable for producing daily plastic parts such as circulation cases and buckets. Mixed with high-pressure polyethylene, can be used for weaving coating, low shrinkage, etc
	DGDA-6094	0.950±0.002	1.0±0.2	Suitable for making circulation cases, various injection molded parts, water towers, pallets, food trays, etc
	DMDA-8007	0.963±0.002	8.2±2.1	Suitable for making circulation cases, various injection molded parts, water towers, pallets, food trays, etc
	DMDB-8008	0.956±0.002	7.2±0.8	Low melting injection molding
	HD-62N07	0.962±0.002	7±1	Suitable for making circulation cases, various injection molded parts, water towers, pallets, food trays, etc
	HD-52B18	0.952±0.002	18±2	Suitable for producing daily plastic parts such as circulation cases and buckets

None

Go back to the previous page

Related Products

Product Message

Address: 288 Jinhuan Road, Jinshan District, Shanghai

Comprehensive Management Department:（ 86）21-57294218
Market Development Department:（ 86）21-57294299

Mailbox:Leadercata@

WeChat