SLD-S01
features and uses
SLD-S01 catalyst is a slurry-type catalyst masterbatch containing a certain amount of dry powder catalyst dispersed in special mineral oil, which can be applied to the production of high melt index products, with its activity ranging from 15,000 to 30,000 KgPE/Kgcat, and its operation is stable under the application of dry state, condensing state and super-condensing modes, and it can be used to produce low-, medium-, and high-density polyethylene with narrow molecular weight distributions, and the final polyethylene products can be used in extrusion moulding, casting, rotational moulding, injection moulding, and colour masterbatch processing.
Get full product information
Product Introduction
Product quality indicators
| Item | Quality Indicators |
|---|---|
| Magnesium content (calculated as Mg) (mass fraction)/% |
3.0～10.0 |
| Titanium content (calculated as Ti) (mass fraction)/% |
1.0～3.5 |
| Tetrahydrofuran (calculated as THF) (mass fraction)/% |
20～35 |
| Particle size (D50)/ μ M |
18～30 |
| Productivity/（KgPE/Kgcat） |
15000-30000 |
Quality indicators of slurry products
| Item | Quality Indicators |
|---|---|
| Appearance | Black mucus |
| Solid content (mass fraction)/% |
25~31 |
Product grades:
Typical product grades includeTypical product grades include：DFDA-7042、DFDA-2001、DFDA-7050、DFDC-7050H、A-7047、DNDA-7144、LL-ZF4523、LL-ZF4527C、LL-ZF4533H、R546U、R548U、R646U、DMDA-8916、DMDB-8008、DMDB-8910、DMDB-8916、DMDB-8920、DMDA-8007 、DGDA-6094、HD-62N07、HD-52B18 etc.
PE product parameters：：
| Catalyst grade | Product grade | Product density（g/cm3） | Product MI（g/10min） | Product application |
|---|---|---|---|---|
|
SLD-S |
DFDA-7042 |
0.918±0.002 |
2.0±0.2 |
Used as agricultural film, industrial packaging film, mechanical parts, daily necessities, building materials, wires, cable insulation, coatings, and synthetic paper, etc |
|
DFDA-2001 |
0.922±0.002 |
1.0±0.3 |
Suitable for making packaging films, etc | |
|
DFDA-7050 |
0.918±0.002 |
2.0±0.2 |
Lining; Ultra thin film; Outer packaging bags, etc | |
|
DFDC-7050H |
0.921±0.002 |
2.0±0.2 |
Lining; Ultra thin film; Outer packaging bags, etc | |
|
DNDA-7047 |
0.918±0.002 |
1.0±0.2 |
Extrusion, injection molding, agricultural film, greenhouse film, light packaging film, daily packaging bags, lining, etc | |
|
DNDA-7144 |
0.924±0.002 |
20±2 |
Suitable for producing injection molded parts with high requirements for fluidity and flexibility, such as housewares, easy-open can, toys, baskets, plastic flowers, etc. It can also be used for coating, pipes, etc | |
|
LL-ZF4523 |
0.921±0.003 |
2.8±0.8 |
Mainly used in industries such as printing composite film, sanitary film, protective film, decorative film, tissue film, etc | |
|
LL-ZF4527C |
0.927±0.003 |
3.5±0.5 |
Mainly used in industries such as printing composite film, sanitary film, protective film, decorative film, tissue film, etc | |
|
LL-ZF4533H |
0.930±0.003 |
4.0±0.5 |
Mainly used in industries such as printing composite film, sanitary film, protective film, decorative film, tissue film, etc | |
|
R546U |
0.936±0.003 |
5.0±0.5 |
Mainly used for molded products such as containers, kayaks, amusement boats, road guardrails, collision barriers, etc | |
|
R548U |
0.937±0.003 |
5.0±0.5 |
Mainly used for molded products such as containers, kayaks, amusement boats, road guardrails, collision barriers, etc | |
|
R646U |
0.935±0.003 |
5.6±1.0 |
Mainly used for molded products such as containers, kayaks, amusement boats, road guardrails, collision barriers, etc | |
|
DMDA-8916 |
0.951±0.002 |
16±3 |
Suitable for producing daily plastic parts such as circulation cases and buckets. Mixed with high-pressure polyethylene, can be used for weaving coating with low shrinkage, etc | |
|
DMDB-8008 |
0.956±0.002 |
7.2±0.8 |
Low melting injection molding | |
|
DMDB-8910 |
0.954±0.002 |
10±2 |
Good hardness and alertness, high softening point and usage temperature, good chemical resistance, suitable for production of daily plastic parts such as circulation cases and buckets | |
|
DMDB-8916 |
0.951±0.002 |
16±3 |
Suitable for producing daily plastic parts such as circulation cases and buckets. Mixed with high-pressure polyethylene, can be used for weaving coating with low shrinkage, etc | |
|
DMDB-8920 |
0.954±0.002 |
20±4 |
Suitable for producing daily plastic parts such as circulation cases and buckets. Mixed with high-pressure polyethylene, can be used for weaving coating, low shrinkage, etc | |
|
DMDA-8007 |
0.963±0.002 |
8.2±2.1 |
Suitable for making circulation cases, various injection molded parts, water towers, pallets, food trays, etc | |
|
DGDA-6094 |
0.950±0.002 |
1.0±0.2 |
Suitable for making circulation cases, various injection molded parts, water towers, pallets, food trays, etc | |
|
HD-62N07 |
0.962±0.002 |
7±1 |
Suitable for making circulation cases, various injection molded parts, water towers, pallets, food trays, etc | |
|
HD-52B18 |
0.952±0.002 |
18±2 |
Suitable for producing daily plastic parts such as circulation cases and buckets |
Related Products
Product Message
Contact Us
Address: 288 Jinhuan Road, Jinshan District, Shanghai
Comprehensive Management Department:（ 86）21-57294218
Market Development Department:（ 86）21-57294299
Mailbox:Leadercata@
Copyright Shanghai Leader Catalyst Co., Ltd. SEO Power by:www.300.cn 
沪公网安备31011602002448